Installation method: When using a tight fit inner ring, the installation method depends on whether the bearing has a straight or tapered bore. Then install the lock washer and lock nut or clamping end cover to fix the bearing on the shaft shoulder. After the bearing cools down gradually, tighten the

1. Bearing radial loadThe bearing that mainly bears radial load is the radial bearing. The nominal contact angle of this type of bearing is a0<=45 0="" br="">N-type and NU-type cylindrical roller bearings can only bear radial loads, and other types of radial bearings can bear both radial loads and a

How to check whether the imported bearing lubricating grease is moldy1. Sunlight exposure methodIn a sunny life, use a screwdriver to remove the grease, and then fly to 45 degrees. Compared with the sun, observe the droplet condition. In the sun, you can clearly see that there is no debris in the gr