 |
R165121420 bearing
Rexroth
|
Product Description
A linear guide block, or "carriage," is a component of a linear guide. This block is situated on the rail. Internal steel ball bearings minimize friction, allowing the block to travel up and down the rail smoothly. These bearings can be easily fall out if the carriage is opened, and they cannot be easily replaced once removed. It is therefore recommended that users not open the block. Linear carriages are most commonly made of carbon steel or stainless steel.
| Bearing number | R165121420 bearing |
| Nominal size | 25mm |
| Width of runner block | 70mm |
| Length of runner block | 86.2mm |
| Height of runner block | 29.9mm |
| Weight | 0.669kg |
| Brand | Rexroth |
| Category | Linear guide block |
|
Product Description
A linear guide block, or "carriage," is a component of a linear guide. This block is situated on the rail. Internal steel ball bearings minimize friction, allowing the block to travel up and down the rail smoothly. These bearings can be easily fall out if the carriage is opened, and they cannot be easily replaced once removed. It is therefore recommended that users not open the block. Linear carriages are most commonly made of carbon steel or stainless steel.
| Bearing number | R165121420 bearing |
| Nominal size | 25mm |
| Width of runner block | 70mm |
| Length of runner block | 86.2mm |
| Height of runner block | 29.9mm |
| Weight | 0.669kg |
| Brand | Rexroth |
| Category | Linear guide block |
