Food Equipment

Views: 0 Author: Site Editor Publish Time: 2024-09-25 Origin: Site

Food equipment needs to fully consider the sanitation and safety of the food produced.

At the same time, in order to highlight the characteristics of their own food, each food production company often uses original production equipment.

The food production process is generally divided into two parts: the front process (raw material processing, food manufacturing/processing) and the back process (distribution/metering, packaging/filling).

The front process includes raw material washing, cutting, and classification. According to different production methods, a variety of production equipment has been developed. In the back process, the accuracy and speed of the equipment are mainly required to be high.

In recent years, the emergence of problems such as foreign matter in food has caused serious concerns among the public about food safety. Therefore, food equipment is required to be safer, more reliable, and easier to maintain.

By using unique core technologies such as material technology, lubrication technology, and precision technology, we meet market needs and make great contributions to the improvement of food equipment performance.

Food Equipment

Hot News

How to deal with stick-slip of bearing roller conveyor chain?

The bearing roller conveyor chain is sticky and slippery, and the production line is frequently interrupted, which reduces work efficiency, causes severe corrosion, and shortens the service life.Treatment method for sticky and slippery bearing roller conveyor chain:Even if the bearing roller conveyo
Five things to note when bearing operation

1. Mechanical damageIn severe cases, metal peeling and large-scale messy scratches occur on the contact surface; generally, bearing mechanical damage refers to the presence of grooves of varying degrees on the alloy surface of the bearing. The main reason for the mechanical damage of the bearing whe
Defects caused by heating of forgings

Beryllium oxide: Beryllium oxide not only causes a large loss of steel, but also reduces the surface quality of forgings and the service life of forging dies. If it is pressed into the metal, it will cause the forgings to be scrapped. Failure to remove beryllium oxide will affect turning.Decarburiza
How much does moisture affect bearing life?

The normal operation of bearings is inseparable from effective lubrication, but the harm of water to bearings may not be taken seriously by everyone. In fact, water has a great impact on the life of bearings. Only a small amount of water (close to 500ppm) can greatly reduce the life of rolling beari
How to install TIMKEN cylindrical roller bearings

Installation method: When using a tight fit inner ring, the installation method depends on whether the bearing has a straight or tapered bore. Then install the lock washer and lock nut or clamping end cover to fix the bearing on the shaft shoulder. After the bearing cools down gradually, tighten the
Several factors in selecting bearing types

1. Bearing radial loadThe bearing that mainly bears radial load is the radial bearing. The nominal contact angle of this type of bearing is a0<=45 0="" br="">N-type and NU-type cylindrical roller bearings can only bear radial loads, and other types of radial bearings can bear both radial loads and a