Single row taper roller bearing 32208
Single row taper roller bearing 32208
Quick Details:
Structure: Taper Type: Roller
Brand Name: CLUNT
Bore Size: 40 - 40.01 mm
Outside Diameter: 80 - 80.01 mm
Model Number: 4T-32208
Precision Rating: P0,P6,P5,P4,P2
Seals Type: open
Number of Row: Single Row
Place of Origin: Sweden
Types: taper roller bearing
Model number: 4T-32208 bearings
Material: Chrome steel Gcr15
Thickness: 24.75mm
Vibration rank: V1, V2, V3, V4
Weight: 0.56
Noise Level: EMQ V1 Z2, EMQ V2 Z3, EMQ V3 Z4, EMQ V4
Lubrication: oil or grease
Hardness: HRC60-65
Certification: ISO9001:2000 TS16949
Introductions of tapered roller bearings:
The projection lines of all the tapered surfaces meet at a common point on the bearing axis. Their design makes taper roller bearings particularly suitable for the accommodation of combined (radial and axial) loads.
The axial load carrying capacity of the bearings is largely determined by the contact angle. The larger the angle, the higher the axial load carrying capacity.
Taper roller bearings have the logarithmic contact profile that provides for optimum stress distribution over the roller/raceway contacts
The special design of the sliding surfaces of the guide flange and large roller ends considerably promotes lubricant film formation in the roller end/flange contacts.
Advantages of 4T-32208 bearings
Dimensional Stability
Long Life Even In Contaminated Lubricant
Durable Steel Cage
Dimensionally Interchangeable With Other Bearing Manufacturers
Applications of 4T-32208 bearings
In many applications taper roller bearings are used in back-back pairs so that axial forces can be supported equally in either direction.
Pairs of taper roller bearings are used in car and vehicle wheel bearings where they must cope simultaneously with large vertical (radial) and horizontal (axial) forces.
Agriculture, Construction and Mining Equipment
Various Axle Systems
Conveyance Vehicles
Gear Box, Engine Motors, Reducers